Currently viewing the category: "Aastra Tutorials"

Configuring Listening for Multicast Paging on an Aastra Phone

On March 28, 2013 · Leave a Comment · In Aastra, Aastra Tutorials, CyberData, CyberData Tutorials
Aastra 6735i

This guide covers configuring the Aastra 6730i, 6731i, 6739i, 6753i, 6755i, 6757i, 9143i, and 9480i to listen to a CyberData v3 Paging Server.

Continue Reading →

Configuring an Aastra 6739i SIP Phone with 3CX

On November 15, 2011 · 3 Comments · In 3CX, 3CX Overviews, Aastra, Aastra Tutorials
aastra_6739_thumb

Configuring an Aastra 6739i SIP Phone with 3CX is actually very simple since all of the Aastra phones are designed to be provisioned in the same way. Even though in the current version of 3CX (v10 SP4 at the time of this writing) does not show the Aastra 6739i as a supported phone, we can just select the default Aastra template and that will work just fine.

Continue Reading →

Provisioning Aastra IP Phones with trixbox Pro

On December 28, 2010 · Leave a Comment · In Aastra, Aastra Tutorials, IP PBX Systems, trixbox, trixbox Tutorials, VoIP Hardware
trixbox_aastra_thumb

The Aastra IP phones are probably the easiest phones available to get working with trixbox Pro, just plug them into your network and that’s about it. trixbox Pro will automatically create a new extension and phone device for you and tell the phone where to get it’s configuration file from. All you need to do is edit the extension with the user’s information and the phone is ready to use. There really is no easier to use phone with trixbox Pro than the Aastra IP phones.

Continue Reading →

Manually Configuring Aastra Phones with 3CX

On September 9, 2009 · Leave a Comment · In 3CX, 3CX Tutorials, Aastra, Aastra Tutorials, Tech Bench

In this guide Kerry shows you how to manually configure Aastra phones with 3CX

Continue Reading →

How to unlock Aastra 6730i/6731i programmable keys

On July 14, 2009 · Leave a Comment · In Aastra, Aastra Tutorials, Tech Bench

The Aastra 6730i and 6731i model IP phones come with 8 programmable keys for customization, which are located at the top of the phone. These keys can be set as BLFs (Busy Lamp Fields), Speed Dials, and XML application commands amongst other settings. But as anyone who has used these phones know, out of those keys, two come from factory locked, with pre-configured settings.

Continue Reading →

Registering the Aastra MBU-400 to 3CX

On June 11, 2009 · 6 Comments · In 3CX, 3CX Tutorials, Aastra, Aastra Tutorials, Tech Bench

Ever since the Aastra MBU-400 hit the streets I have wanted to do a hands on article about this Dect solution.  For around two months now this unit has been registered to the trixbox Pro server in our lab, so that on the rare sunny day in Buffalo we can field [...]

Continue Reading →

3CX Auto Provision Templates – Aastra 6730i and 6731i

On June 2, 2009 · Leave a Comment · In 3CX, Aastra, Aastra Tutorials, Tech Bench

I just completed a few Auto Provision Templates for 3CX.  I had a Customer looking to take advantage of the built in provisioning in 3CX, as he had a large quantity of Aastra 6730i and 6731i IP phones.  At this time though, the current version [...]

Continue Reading →