Cisco SGE2010P
Cisco SGE2010P Summary
The Cisco SGE2000P 24-Port Gigabit Switch helps maximize system availability, with fully redundant stacking and dual images for resilient firmware upgrades. The switch helps secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control lists (ACL), denial-of-service (DoS) prevention, and MAC-based filtering. The enhanced quality of service (QoS) and traffic-management features help ensure clear and reliable IP voice and video communications.
For wireless or voice over IP (VoIP) deployments, the Cisco SGE2000P supports the IEEE802.3af standard for Power over Ethernet (PoE). Automatic load sensing in the power control circuitry automatically detects PoE on the end device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators for power status. A maximum of 15.4W is available on the Fast Ethernet ports for powering PoE-enabled wireless access points or VoIP handsets, with a maximum per-device PoE delivery of 185W available for all ports.
The Cisco SGE2000P provides an intuitive, secure management interface, enabling network administrators to better utilize its comprehensive management feature set, for a better-optimized and more secure network.
Cisco SGE2010P Core Features
- 48 - 10/100/1000 Ethernet ports
- 4 mini-GBIC slots (shared with 4 Ethernet ports) for fiber Gigabit Ethernet expansion
- IEEE 802.3af PoE delivered over any of the 48 10/100/1000 ports
- 15.4W available power to a GE port for PoE-enabled wireless AP or VoIP handsets (maximum per-device PoE delivery of 360W available for all ports)
- Dual images for resilient firmware upgrades
- 96 Gbps, non-blocking, store-and-forward switching capacity
- Simplified QoS management using 802.1p, Diffserv or ToS traffic prioritization
- Power redundancy when used with the RPS1000 Redundant Power Supply unit
- Fully-resilient stacking provides optimized growth with simplified management
- Access Control Lists (ACLs) for granular security and QoS implementation
- Configuration and monitoring from a standard web browser
- Secure remote management of the switch via SSH and SSL encryption
- 802.1q-based VLANs enable segmentation of networks for improved performance
Cisco SGE2010P Technical Specifications
- Model Number
- SGE2010P 48-Port 10/100/1000 Ethernet Switch with PoE
- Ports
- 48 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 Gigabit combo ports shared between mini-GBIC ports; console port; auto MDI/MDI-X; autonegotiate/manual setting; RPS port for connecting to redundant power supply unit
- Cabling Type
- UTP CAT 5 or better for 10BASE-T/100BASE-TX; UTP CAT 5e or better for 1000BASE-T
- LEDs
- PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 - 8
- Power over Ethernet
- IEEE 802.3af PoE on delivered over any of the 48 10/100/1000 ports Maximum power of 15.4W to an Ethernet port—360W total available to all ports with regular AC power, 280W total available with RPS
- Performance
- Switching Capacity
- Forwarding Rate (Based on 64-byte Packets)
- 71.4M packets per second (64-byte packets)
- Stacking
- Stack Operation
- Up to 192 ports in a stack
- Hot insertion and removal
- Ring and chain stacking options
- Master and backup master for resilient stack control
- Auto-numbering or manual configuration of units in stack
- Layer 2
- MAC Table Size
- Number of VLANs
- 256 active VLANs (4096 range)
- VLAN
- Port-based and 802.1q tag-based VLANs; protocol-based VLAN; management VLAN; multicast TV VLAN; private VLAN Edge (PVE); GVRP
- HOL Blocking
- Head of line blocking prevention
- Layer 3
- Layer 3 Options
- Static routing; Classless Interdomain Routing (CIDR); 60 static routes; IPv4 and IPv6; Forwarding in silicon - wirespeed forwarding of Layer 3 traffic
- IPv6
- IPv6 Options
- IPv6 over Ethernet, dual stack, IPv6 over IPv4 network with ISATAP tunnel, IPv6 Neighbor Discovery, Stateless Address Configuration, MTU Discovery, WEB, SSL, Telnet, Ping, Traceroute, SNTP,TFTP, SNMP, RADIUS, ACL, QoS, Protocol Based VLANs
- Management
- Web User Interface
- Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
- Firmware Upgrade
- Web Browser Upgrade (HTTP) and TFTP Dual Images for Resilient Firmware Upgrades
- Port Mirroring
- Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe.
- RMON
- Embedded Remote Monitoring (RMON) Software Agent Supports Four RMON Groups (History, Statistics, Alarms, and Events) for Enhanced Traffic Management, Monitoring, and Analysis
- Other Management
- Traceroute; single IP management; SSL security for web user interface; Secure Shell (SSH); RADIUS; port mirroring; TFTP upgrade; DHCP client; BootP; SNTP; Xmodem upgrade; cable diagnostics; PING; syslog; Telnet client (SSH secure support)
- Security
- Access Control ACLs
- Drop or rate limit based on source and destination MAC or IP address, protocol, port, VLAN, DSCP/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, ICMP packets, IGMP packets, DHCP snooping, ARP inspection, and IP source address guard Up to 1018 rules
- IEEE 802.1X
- 802.1x - RADIUS authentication, MD5 Hash; guest VLAN; single/multiple host mode
- Availability
- Link Aggregation
- Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups
- Storm Control
- Broadcast, multicast and unknown unicast
- DOS Prevention
- Spanning Tree
- IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple Spanning Tree, Fast Linkover
- IGMP Snooping
- IGMP (v1/v2) Snooping Limits Bandwidth-Intensive Video Traffic to only the Requestors. Supports 256 Multicast Groups
- QoS
- Priority levels
- Scheduling
- Priority Queuing and Weighted Round Robin (WRR)
- Rate Limiting
- Ingress policer; egress rate control; per VLAN
- Class of Service
- Port-based; 802.1p VLAN priority-based; IPv4/v6 IP Precedence/TOS/DSCPbased; Diffserv; Classification and Re-marking ACLs
