Digium

Digium TE122 -

The Digium TE122 is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems with emerging Voice over IP technologies.

The TE205P supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis. The TE205P is for use only with a 5.0 volt PCI slot.

Digium TE210P The TE210P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE210P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium TE220 Digium's TE220 PCI Express card provides termination of up to 60 channels of voice or data across two E1, T1, or J1 interfaces in a PCIe x1 form factor.

Digium TE405P -

Digium Wildcard TE405P Quad t1 PCI Card for Asterisk Open Source PBX

The TE405P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture. The TE405P supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, and J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE405P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server. Digium has designed the TE405P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications. The TE405P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features. The TE405P is for use only with a 5.0 volt PCI slot. The TE410P is for use only with a 3.3 volt PCI slot - typically available on newer motherboards and in 64-bit PCI bus architectures. Protocols Supported: SIP, IAX, H.323 The TE405P, can be a quad E1 or T1 selectable per card or per port. Now you can do both signaling formats in a single card. Also, with our new bus mastering design, there are significant performance improvements over older designs. We strive to make our hardware backward compatible with existing Asterisk applications, so this card is a drop-in replacement for legacy quad cards. The TE405P has been approved for use in Australia, Europe, and the United States.

Digium TE410P
- Digium Wildcard TE410P Quad (4) T1 Card Asterisk PBX

The Digium TE410P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the Digium TE410P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

The Digium TE410P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The Digium TE410P supports a 3.3v PCI slot only - typically available on newer motherboards and in 64-bit PCI bus architectures. The Digium TE410P is for use only with a 5.0 volt PCI slot.

Digium TE420 Four Port T1/E1 PCI Express Asterisk Interface. Digium's TE420 PCI Express card provides termination of up to 120 channels of voice or data across four E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE420 allows E1 and T1 circuits to be mixed with full channel synchronization.

Digium VPM128 VPMOCT128MF H/W Echo Cancellation Module for Quad Span T1 Cards

Digium X100M -

1 Port FXO Module for TDM400P and TDM800P cards.