Patton Copperlink 2173/EUI-2PK
Patton Copperlink 2173/EUI-2PK Summary
The CopperLink™ Model 2173 High Speed
Ethernet Extender leverages existing copper
infrastructure to deliver high-speed Ethernet
extension. Providing aggregate data rates up to 155
Mbps (upstream + downstream), the Model 2173 is
the perfect solution for delivering triple-play communications services and other bandwidth-intensive applications. CopperLink™ Ethernet Extenders
easily inter-connect remote devices or remote networks to a central LAN for such applications as
medical imaging, video-conferencing, Ethernet
bridging, Triple Play, and VoIP.
The Model 2173 includes an auto-rate adaptation
feature providing the maximum achievable asymmetrical ine rate based on environment and the
length and gauge/type of cable. Asymmetrical line
rates are the ideal solution for applications that
require longer extension between their Ethernet
devices and for applications that primarily involve
high downstream requirements. These asymmetrical applications include high resolution IP video for
security, medical imaging, livestock monitoring,
underwater video, and internet gaming. Also
included in the Model 2173 is the ability to configure the Ethernet Extender for a hard set 25-Mbps
symmetrical line rate. Typical symmetrical applications include remote LAN extension, video eleconferencing, and data backhaul.
Get near-fiber performance without the expense with
Patton’s High Speed CopperLink Ethernet Extenders.
Patton Copperlink 2173/EUI-2PK Core Features
- Ethernet Extension—Extends 10/100Base-TX Ethernet up to 4,250 feet over 2-wire 24 AWG twisted pair.
- Operates Over Twisted Pair—Near fiber speeds without the cost of new cable or fiber installations or the hassles of wireless line of site.
- Plug and Play—Modems need no configuration to operate, Ethernet ports are auto-sensing 10/100, full or half duplex.
- Multiple Line Rates Supported—Switch-selectable line rates ensure best possible rate vs. reach combination.
- Transparent LAN Bridging—No network configuration. Will pass higher layer protocols, including 802.1Q VLAN tagged and untagged packets. Fully transparent to various UP video compression schemes such as WMV, MPEG-4 and MJPEG.
Patton Copperlink 2173/EUI-2PK Technical Specifications
- CopperLink Line Interface
- RJ-45 (pin 4 = ring; pin 5 = tip
- CopperLink Line Modulation
- DMT (Discrete Multi-Tone)
- Ethernet Interface (x2)
- 8-position shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation.
- Protocol
- Transparent to high layer protocol- Supports 802.1Q VLAN tagged frames. Transparent to IP video schemes- Fully transparent to compression schemes such as WMV, MPEG-4 and MJPEG
- Management
- Line Rate control via 4-position DIP switch
- Monitoring
- 6 LEDs: Power, Link, Ethernet 1 & 2, Remote, Local
- MTBF
- Dimensions
- 1.5H x 4.13W x 3.75D in. (38.1H x 105W x 95.3D mm)
- Power Supply
- External universal 100–240 VAC input or -48 VDC
- Compliance
- FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC
- Environment
- Temperature: 0–40°C Humidity: 5–90%, non-condensing
- Weight
