Home :: PSTN to VoIP Solutions :: Quintum BX204

Quintum BX204

Quintum BX204 Summary

Quintum Tenor BX204 2 Port BRI Gateway

This Unit can be purchased with the Survivability Option. For more on Survivability, please read the section below. 

This Model comes with 2 BRI ports, and can support 4 BRI channels ONLY.

Quintum Tenor BX204 2 Port BRI Gateway

The Tenor BX is a high-density VoIP (Voice over Internet Protocol) H.323/SIP switch that converts voice, fax, and modem data on digital circuit switched trunks, and transmits it over the IP network. The Tenor BX is suitable for small to medium enterprises and service provider applications by supporting 2, 4 or 8 BRI (Basic Rate Interfaces (2B+D channel) ports with S/T interface, supporting up to 16 voice channels.

Why use Quintum Tenor BX204 2 Port BPRI Gateway?

The Quintum® Tenor® BX MultiPath Switch offers enterprises using ISDN Basic Rate Interface (BRI) lines an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates VoIP gateway functionality with its unique intelligent call routing, MultiPath architecture, and QoS support all in one solution. Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long distance consolidation and call centers. BX Series products can support either 2, 4 or 8 BRI lines.

 

Quintum Tenor BX204 2 Port BRI Gateway Features

• MultiPath architecture for easy integration with existing voice and data infrastructure, meaning little or no re-programming of the PBX, or upgrades are required and no need for special dialing plans.
• Transparent MultiPath Call Routing to intelligently route calls between the PBX, the PSTN, and the IP network to achieve the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations.
• PacketSaver Technology multiplexing to reduce bandwidth consumption by up to 57% by combining voice packets from multiple calls into a single packet.
• Universal Dial Plan that provides a programmable dial plan so Tenor to be integrated into any network environment.
• Auto Provisioning interface allows the Tenor solution to be deployed worldwide, and configured automatically by acquiring the configuration information from a central server, upon installation. The same auto-provisioning capability allows the Tenor to be configured from a VoIP application, thus supporting a single user interface between the VoIP application and the Tenor configuration.
• Unified Communications Proxy (UCP) provides 'Any to Any' connectivity: SIP-SIP, TDM-TDM and SIP-TDM, for easy integration with any network.
• NATAccess™ to allow Tenor to operate behind NAT firewalls to translate internal IP addresses into public addresses when a VoIP call is established with an outside party.
• Remote Management for anywhere, anytime remote management even behind NAT firewalls with Quintum's Remote Management Session Server.

Product Core Features

Available with 2, 4 or 8 BRI S/T Ports Up to 16 VoIP channels MultiPath and Gateway configurations Auto-Provisionable Survivable Unified Communications Proxy (UCP) Supported by Remote Management Tools Perfect for small and medium-sized enterprises with ISDN lines Automatic call type detection: Voice/Modem/Fax Trunk group support Public and private dial plan support User programmable dial plan support Forced IP routing and IP port mapping PSTN pass-through support for calls to Toll-free, local, and special service numbers (emergency service, etc.) Automatic appending and stripping of digits to dialed numbers Call Detail Records Least cost routing with external Quintum VoIP Call Routing Server Caller ID Name and Number

Product Specifications

Telephony Specifications Voice algorithms: G.723.1 and G.729ab, G.711 Auto codec negotiation Fax support: Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps, using industry standard T.38; Super G3 compatible up to 33.6 Kbps Modem over IP Choice of 2, 4, 6, or 8 T1/E1/PRI Spans Standard RJ-45 Connectors Coding: A-law, μ-law Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G 168, up to 128 msec tailsize PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100 T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF) E1 CAS (R2 MF) DASS2 Tandem/TDM switching Maximum Call Rate: 7,200 calls/hour VoIP to circuit, and circuit to circuit (Tandem/TDM) switching IP Network Specifications LAN Interface: Fast Ethernet port (10/100 Base-T) Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections QoS Support: IP TOS, DiffServ VoIP Network Specifications H.323 v.3 Gateway and Integrated Gatekeeper Support for multiple SIP User Agents (RFC3261 compliant endpoint) DTMF Signaling via FRC 2833 or SIP Info SIP Supplementary Services Message Waiting Indicator SIP Refer Method support IVR/RADIUS server support for AAA with integrated multilingual IVR Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG) Adaptive Jitter Buffer Packet Loss Compensation NATAccess™ - NAT/Firewall Security: IP Filtering Up to 120 simultaneous VoIP calls Support for DNS-SRV Configuration/Management Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring Remote Access with external Remote Management Session Server SNMPv2 Agent Command Line Interface