Home :: PSTN to VoIP Solutions :: RedFone foneBridge2 750-5050 Dual T1/E1

RedFone foneBridge2 750-5050 Dual T1/E1

RedFone foneBridge2 750-5050 Dual T1/E1 Summary

RedFone foneBridge2 750-5050 Dual T1/E1

Product Description

Obtaining a reliable, fault tolerant, highly available system with ASTERISK® has been difficult and nearly impossible especially from the PRI/TDM standpoint. IP based toolsets have been around for a number of years to allow integrators the ability to provide fault-tolerance on the VoIP side of their implementation. Until today however, providing
quick, reliable and robust T1/E1 fail-over has been nearly non-existent. The foneBRIDGE fills this void allowing IT Managers and Systems Integrators to implement Asterisk in the most demanding of environments where downtime is a luxury a business simply can not afford.

Key Product Features

• Dual T1/E1 PRI Trunk Termination Ports
• Legacy PBX-to-Asterisk integration
• High-Availability/Failover Asterisk Clusters
• Channel Bank connectivity
• Mixed telephony enviroments (E1 PRI's + T1 Channel Banks)
• Perfect for BLADE servers where PCI slots are not available.
• Asterisk and Trixbox Supported

Product Benefits

• Failover and HA Enabled
• High-Availability through rapid failover capabilities ensures your critical telephony services are always on and available

• Flexible Configuration
• Configurable on a per-port basis, foneBRIDGE2 allows you to mix multiple telephony standards on a single deployment

• Solid State Embedded Appliance
• No moving components. Low heat and power consumption ensures high MTBF (mean time before failure)

• Field Upgradeable
• Our highly flexible and powerful FPGA architecture allows users to quickly upgrade units in the field when product enhancements and new features are released.

• Simplifies Installation
• True Plug & Play hardware
• Simplifies cabling; place it wherever is most convenient
• Leverages commodity servers; no need for a certified box
• Eliminates requirment for proprietary T1/E1 cards
• Ethernet only requirment. No need to worry about having the correct PCI, PCI-X, PCIe slot!

• Fully Asterisk Compatible
• Employs native Asterisk TDMoE format and utilities
• Follows standard Asterisk configuration rules and syntax
• Compatible with PRI, channel banks and legacy PBX systems
  
  
• TELEPHONY STANDARDS
• PRI Switch Compatibility– EuroISDN, AT&T 4ESS, DMS 100, Lucent 5E, NI1/NI2; Network or CPE
• Line Interface– Dual or Quad T1/E1 (RJ45), per port configurable
• Line Encoding– AMI/B8ZS for T1, AMI/HDB3 for E1
• Super Frame (SF) and Extended Super Frame (ESF)
• Robbed Bit Signaling (RBS/CAS)