RedFone foneBridge2 750-5050-EC - Dual T1/E1 with EC
RedFone foneBridge2 750-5050-EC - Dual T1/E1 with EC Summary
REDFONE foneBridge2 750-5050-EC Dual T1/E1 with Echo Cancellation
Obtaining a reliable, fault tolerant, highly available system with ASTERISK® has been difficult and nearly impossible especially from the PRI/TDM standpoint. IP based toolsets have been around for a number of years to allow integrators the ability to provide fault-tolerance on the VoIP side of their implementation. Until today however, providing
quick, reliable and robust T1/E1 fail-over has been nearly non-existent. The foneBRIDGE fills this void allowing IT Managers and Systems Integrators to implement Asterisk in the most demanding of environments where downtime is a luxury a business simply can not afford.
- 2 T1/E1 PRI Trunk Termination Ports
- Hardware Echo Cancellation
- Legacy PBX-to-Asterisk integration
- High-Availability/Failover Asterisk Clusters
- Channel Bank connectivity
- Mixed telephony enviroments (E1 PRI's + T1 Channel Banks)
- Perfect for BLADE servers where PCI slots are not available.
- Asterisk and Trixbox Supported
-
Failover and HA Enabled
- High-Availability through rapid failover capabilities ensures your critical telephony services are always on and available
-
Flexible Configuration
- Configurable on a per-port basis, foneBRIDGE2 allows you to mix multiple telephony standards on a single deployment
-
Solid State Embedded Appliance
- No moving components. Low heat and power consumption ensures high MTBF (mean time before failure)
-
Field Upgradeable
- Our highly flexible and powerful FPGA architecture allows users to
quickly upgrade units in the field when product enhancements and new
features are released.
-
Simplifies Installation
- True Plug & Play hardware
- Simplifies cabling; place it wherever is most convenient
- Leverages commodity servers; no need for a certified box
- Eliminates requirment for proprietary T1/E1 cards
- Ethernet only requirment. No need to worry about having the correct PCI, PCI-X, PCIe slot!
-
Fully Asterisk Compatible
- Employs native Asterisk TDMoE format and utilities
- Follows standard Asterisk configuration rules and syntax
- Compatible with PRI, channel banks and legacy PBX systems
-
TELEPHONY STANDARDS
- PRI Switch Compatibility– EuroISDN, AT&T 4ESS, DMS 100, Lucent 5E, NI1/NI2; Network or CPE
- Line Interface– Dual or Quad T1/E1 (RJ45), per port configurable
- Line Encoding– AMI/B8ZS for T1, AMI/HDB3 for E1
- Super Frame (SF) and Extended Super Frame (ESF)
- Robbed Bit Signaling (RBS/CAS)
