Home :: PA System :: Valcom VIP-802 Dual Networked Page Zone Extender

Valcom VIP-802 Dual Networked Page Zone Extender

Valcom VIP-802 Dual Networked Page Zone Extender Summary

Valcom VIP-802

The VIP-802 Networked Page Zone Extender enables voice access to a single zone of one-way paging over an IP-based LAN/WAN. This allows page zone extension anywhere on the network.

Mounting
The VIP-802 is designed for wall or table mounting.
Table: Provided with the VIP-802 are four rubber stick on feet. Peel these feet off their carrier backing and place at the four corners of the bottom of the unit.
Wall: Using the template and instructions provided, secure the VIP-802 to the wall.

Power Connections
The preferred method of powering a VIP-802 is via a power over Ethernet switch meeting the 802.3af specification. If the rear panel barrel connector is used for power, the preferred power supply is a Valcom VIP-324. Make all required signal connections before applying power to the unit. If powering via 802.3af, make sure all signal connections via the back panel are made then connect the VIP-802 to the Ethernet switch.
If power is supplied via the barrel connector, make sure all signal connections are secure. Attach the unit to the network via the front panel RJ-45 Ethernet connector. Apply power by plugging the power supply into the VIP-802 via the barrel connector on the rear of the VIP-802.

Network Connection
The VIP-802 has one CAT-5 RJ-45 network connector on the front panel. Use one of the supplied CAT-5 patch cables to connect the VIP-802 to an Ethernet switch. If the Ethernet switch is 802.3af compliant the VIP-802 will draw power from it.

Signal Connections
The VIP-802 has 3 signal connectors on the rear panel.

• 1 RCA jack for AUX audio input
• 2 RJ-45 connectors for audio and relay connections for each networked channel

Networked Channels: Access to the networked audio is via two rear panel RJ-45 connectors. These connectors may be wired using standard RJ-45 terminations. Provided with the VIP-802 are two 3 foot RJ-45 patch cables and two RJ-45 “Biscuit Block” style connectors. You may easily connect to the signals by plugging one end of a patch cable to the VIP-802 and the other in to a “Biscuit Block” connector. Access to the signals is via screw terminal under the block cover. Signals are present on pairs of pins.

Pins - Wire Color - Signal
1,2 - Blue & Orange - Audio Input
7,8 - Brown & Grey - Audio Output
3,6 - Black & Yellow - Contact Closure Input
4,5 - Red & Green - N.O. Relay Closure Output

Status Indicator Lights:
The VIP-802 has 3 status indication lights on the front panel:
STATUS: Flashes to indicate power.
LINK: Indicates 100 Mbit Ethernet connection when illuminates. No activity indicates 10 Mbit connection.
ACT: Indicator flashes to indicate network activity.

Valcom VIP-802 Core Features

• 2 Audio Outputs & Inputs
  
• 2 Contact Closure Inputs
  
• 2 Programmable Form C Relay Contacts

Valcom VIP-802 Audio Ports (Line Level -10 dbm)

Peer-Peer, No Server Required Auto Destination Programmable DTMF Dial Select - 1024 Zones 1 to 11 Digit Dial Plans Two Way – Transmit / Receive POE 802.3af, Class 3, or Local Power 24 VDC Can Use DHCP Servers to Acquire IP Addresses Easy Windows® Based Setup Contact Closure for AUX Audio Input, Audio Indication, Door Unlocking 1 RJ45 Ethernet Connection Front Panel Activity LED Network Activity LEDs Radio Link w/Mic Closure/VOX Point to Point, Zones, Groups, All Call SIP, UDP, Multicast Local Aux Analog Input (RCA Jack) Mutes Aux During Page Programmable Contact Closure Activation or VOX Activation Audio & Contact Closure Per Port Applications Paging Analog or IP Loudspeakers Wide Area Voice Notification System Radio Link Remote Audio Monitoring

Valcom VIP-802 Features

2 Audio Outputs 2 Audio Inputs 2 Form A relay contacts 2 Contact Closure Inputs RJ-45 for network connection Front panel activity LED Provides audio for up to 150 Valcom one-way amplified speaker assemblies AUX audio input via RCA jack Contact closure or VOX operation of audio input Removable screw terminal connectors provided for audio and relay interface Page with music output, music mutes during page Output control contact closure provided during paging output Compatible with 25 or 70 Volt amplifiers 2.5mm jack for DC power Power over Ethernet 802.3af Compliant

Valcom VIP-802 Specifications

Protocols DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, FTP Voice Algorithm G.711 (64kbits/s)(ulaw) Echo Suppression Electrical Properties Voltage: 24 Vdc @ 250 mA IEEE 802.3af compatible, class 3 device Regulatory: FCC Part 15 Class A Input Analog Device Interface 600 Ohm Input Impedance VOX and Contact Closure Input Output Analog Output Interface Less Than 50 Ohms output impedance Frequency Response: 200 Hz – 3400 Hz Relay closure available