Home :: PA System :: Valcom VIP-804 Quad Networked Page Zone Extender

Valcom VIP-804 Quad Networked Page Zone Extender

Valcom VIP-804 Quad Networked Page Zone Extender Summary

Valcom VIP-804

The VIP-804 Quad Networked Page Zone Extender enables voice access to four zones of one-way paging over an IP-based LAN/WAN. This allows page zone extension anywhere on the network.

Valcom VIP-804 Core Features

• 4 Audio Outputs
• 4 Audio Inputs
• 4 Programmable Form A Relay Closures
• 4 Programmable Contact Closure Inputs
• No Server Required
• 1 to 11 Digit Dial Plans
• Easy Windows Based Setup
• AUX Audio input
• Contact Closure Available for:
  
  • Audio Indication
    
  • Door Unlocking

Mounting
The VIP-804 is designed for wall, table or rack mounting.
Table: Provided with the VIP-804 are four rubber stick on feet. Peel these feet off their carrier backing and place at the four corners of the bottom of the unit.
Wall: Using the template and instructions provided, secure the VIP-804 to the wall.
Rack: Following the assembly drawing, attach the two mounting ears to the VIP-804 unit. Using rack screws, mount the VIP-804 in an available 1U rack slot.

Power Connections
The preferred method of powering a VIP-804 is via a power over Ethernet switch meeting the 804.3af specification. If the rear panel barrel connector is used for power, the preferred power supply is a Valcom VIP-324. Make all required signal connections before applying power to the unit. If powering via 804.3af, make sure all signal connections via the back panel are made then connect the VIP-804 to the Ethernet switch.
If power is supplied via the barrel connector, make sure all signal connections are secure. Attach the unit to the network via the front panel RJ-45 Ethernet connector. Apply power by plugging the power supply into the VIP-804 via the barrel connector on the rear of the VIP-804.

Network Connection
The VIP-804 has one CAT-5 RJ-45 network connector on the front panel. Use one of the supplied CAT-5 patch cables to connect the VIP-804 to an Ethernet switch. If the Ethernet switch is 804.3af compliant the VIP-804 will draw power from it.

Signal Connections
The VIP-804 has 3 signal connectors on the rear panel.

• 1 RCA jack for AUX audio input
• 2 RJ-45 connectors for audio and relay connections for each networked channel

Networked Channels: Access to the networked audio is via two rear panel RJ-45 connectors. These connectors may be wired using standard RJ-45 terminations. Provided with the VIP-804 are two 3 foot RJ-45 patch cables and two RJ-45 “Biscuit Block” style connectors. You may easily connect to the signals by plugging one end of a patch cable to the VIP-804 and the other in to a “Biscuit Block” connector. Access to the signals is via screw terminal under the block cover. Signals are present on pairs of pins.

Pins - Wire Color - Signal
1,2 - Blue & Orange - Audio Input
7,8 - Brown & Grey - Audio Output
3,6 - Black & Yellow - Contact Closure Input
4,5 - Red & Green - N.O. Relay Closure Output

Status Indicator Lights:
The VIP-804 has 3 status indication lights on the front panel:
STATUS: Flashes to indicate power.
LINK: Indicates 100 Mbit Ethernet connection when illuminates. No activity indicates 10 Mbit connection.
ACT: Indicator flashes to indicate network activity.

Valcom VIP-804 Audio Ports (Line Level -10 dbm)

Peer-Peer, No Server Required Auto Destination Programmable DTMF Dial Select - 1024 Zones 1 to 11 Digit Dial Plans Two Way – Transmit / Receive POE 804.3af, Class 3, or Local Power 24 VDC Can Use DHCP Servers to Acquire IP Addresses Easy Windows® Based Setup Contact Closure for AUX Audio Input, Audio Indication, Door Unlocking 1 RJ45 Ethernet Connection Front Panel Activity LED Network Activity LEDs Radio Link w/Mic Closure/VOX Point to Point, Zones, Groups, All Call SIP, UDP, Multicast Local Aux Analog Input (RCA Jack) Mutes Aux During Page Programmable Contact Closure Activation or VOX Activation Audio & Contact Closure Per Port Applications Paging Analog or IP Loudspeakers Wide Area Voice Notification System Radio Link Remote Audio Monitoring

Valcom VIP-804 Features

4 Audio Outputs 4 Audio Inputs 4 Form A relay contacts 4 Contact Closure Inputs RJ-45 for network connection Front panel activity LED Provides audio for up to 150 Valcom one-way amplified speaker assemblies AUX audio input via RCA jack Contact closure or VOX operation of audio input Removable screw terminal connector provided for audio and relay interface Page with music output, music mutes during page Output control contact closure provided during paging output Compatible with 25 or 70 Volt amplifiers 2.5mm jack for DC power Power over Ethernet 804.3af Compliant

Valcom VIP-804 Specifications

Protocols DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, FTP Voice Algorithm G.711 (64kbits/s)(ulaw) Echo Suppression Electrical Properties Voltage: 24 Vdc @ 250 mA IEEE 804.3af compatible, class 3 device Regulatory: FCC Part 15 Class A Input Analog Device Interface 600 Ohm Input Impedance VOX and Contact Closure Input Output Analog Output Interface Less Than 50 Ohms output impedance Frequency Response: 200 Hz – 3400 Hz Relay closure available