Home :: PA System :: Valcom VIP-811 Enhanced Networked Station Port

Valcom VIP-811 Enhanced Networked Station Port

Valcom VIP-811 Enhanced Networked Station Port
The VIP-811 Enhanced Networked Station Port enables 1 telephone to engage in paging and phone to phone communications over an IP-based LAN/WAN.
Details
 

Where is the Price?Information Where is the Price?888VoIP is a distributor who only sells to Resellers. If you are a current 888VoIP Reseller, please log in now to see your prices. If you are not yet an 888VoIP reseller, please contact us or click the reseller sign up buttons.

You must be logged in to your reseller account to purchase. Please Sign-In

If you do not have a reseller account with us and would like to create one Click Here.

Valcom VIP-811 Enhanced Networked Station Port Summary

Valcom VIP-811

The VIP-811 Quad Networked Page Zone Extender enables voice access to four zones of one-way paging over an IP-based LAN/WAN. This allows page zone extension anywhere on the network.

Valcom VIP-811 Core Features

  • 1 RJ-11 FXS Port
  • 2 Programmable Form C Relay Closures
  • Provides Caller ID
  • No Server Required
  • 1 to 11 Digit Dial Plans
  • Easy Windows Based Setup
  • AUX Audio input
  • Contact Closure Available for:
    • Audio Indication
    • Ringing Indication
    • Door Unlocking

Mounting
The VIP-811 is designed for wall or table mounting.
Table: Provided with the VIP-811 are four rubber pads. Peel the pads from their carrier backing and place at the four corners of the bottom of the unit.
Wall: Using the bracket and screws provided, secure the VIP-811 to the wall.

Power Connections
The preferred method of powering a VIP-811 is via a power over Ethernet switch meeting the 811.3af specification. If the rear panel barrel connector is used for power, the preferred power supply is a Valcom VIP-324. Make all required signal connections before applying power to the unit. If powering via 811.3af, make sure all signal connections via the back panel are made then connect the VIP-811 to the Ethernet switch.
If power is supplied via the barrel connector, make sure all signal connections are secure. Attach the unit to the network via the front panel RJ-45 Ethernet connector. Apply power by plugging the power supply into the VIP-811 via the barrel connector on the rear of the VIP-811.

Network Connection
The VIP-811 has one CAT-5 RJ-45 network connector on the front panel. Use one of the supplied CAT-5 patch cables to connect the VIP-811 to an Ethernet switch. If the Ethernet switch is 811.3af compliant the VIP-811 will draw power from it.

Signal Connections
On the rear panel, the VIP-811 has 1 RJ-11 jack for telephone connection and 1 terminal block for relay connections.

Telephone Connections
Connect standard analog telephones to the VIP-811 via the rear panel RJ-11 jack labeled Phone. Tip and Ring appear on pins 3 and 4 of these jacks.

 Relay Connections
Access to the 2 form C relays is provided via a six pin screw terminal block. The relays are labeled K1 and K2. Each relay is brought out on three terminals. The common contact is the middle terminal with the normally closed contact on the left and the normally open contact on the right. Relay contacts are rated for 1A @ 24VDC.

Setup
Information specific to your application will need to be programmed into the VIP-811 using a computer. The PC used for programming should be connected to the same subnet as the VIP-811. Setup will be done using the IP Solutions Setup Tool. The IP Solutions Setup Tool is included on the CD ROM enclosed with the VIP-811.

Status Indicator Lights:
The VIP-811 has 3 status indication lights on the front panel:
STATUS: Flashes then illuminates to indicate power.
LINK: Indicates 100 Mbit Ethernet connection when illuminates. No activity indicates 10 Mbit connection.
ACT: Indicator flashes to indicate network activity.


Valcom VIP-811 FXS Ports (station ports)
  • Peer-Peer, No Server Required
  • Auto Destination Programmable
  • DTMF Dial Select - 1024 Zones, Groups
  • 1 to 11 Digit Dial Plans
  • Two Way – Transmit / Receive
  • POE 802.3af, Class 3, or Local Power 24 VDC
  • Can Use DHCP Servers to Acquire IP Addresses
  • Easy Windows® Based Setup
  • Relay Closure for Ringing Indication,
  • Audio Indication, Door Unlocking, etc,
  • 1 RJ45 Ethernet Connection
  • Front Panel Activity LED
  • Network Activity LEDs
  • Point to Point, Zones, Groups, All Call UDP, Multicast
  • Caller ID Information - Various Options
  • Applications
    • Hot Line
    • Emergency Intercom
    • Line Extender
    • Red Phone
    • Intercom
    • Courtesy Telephones

Valcom VIP-811 Features
  • RJ-45 for Network Connection
  • 1 RJ-11 telephone connections
  • 2 Relays with Form C Contacts
  • Front panel activity LED
  • Network activity LEDs
  • 2 RENS
  • 2.5mm jack for DC
  • 802.3af compliant

Valcom VIP-811 Specifications
  • Protocols
    • DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, FTP
  • Voice Algorithm
    • G.711 (64kbits/s)(ulaw)
    • Echo Suppression
    • Electrical Properties
    • Voltage: 24 Vdc @ 250 mA
    • IEEE 802.3af compatible, class 3 device
    • Regulatory: FCC Part 15 Class A
  • Station Port
    • 4 REN
    • CID Enabled
  • Relays
    • 2 Form-C Contacts
    • 24 Vdc
    • 2 Amps

Authentication

Cart is empty

Manufacturers

Categories

VoIP Products