Currently viewing the tag: "trixbox CE"

Digium TDM800P Analog Interface Card Overview

On March 1, 2010 · Leave a Comment · In Digium, Digium Overviews, Tech Bench

The Wildcard TDM800P is a half-length PCI 2.2-compliant, 8 port card for connecting analog telephones and analog POTS lines through a PC. It supports combinations of FXS and/or FXO modules for a total of 8 lines.

The TDM800P provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single PCI bracket. This [...]

Continue Reading →

Configuring Cisco 7960 Phones with trixbox CE / Pro

On February 26, 2010 · 1 Comment · In Tech Bench

While Cisco does not support using the 79xx series of phones on third-party IP PBX platforms such as Asterisk/trixbox, it is possible to get them to work with a little effort.  If you do not have the SIP firmware for the phones, this will be your biggest hurdle as the only way to [...]

Continue Reading →

Fonality Names Dean Mansfield as CEO

On January 19, 2010 · Leave a Comment · In News, trixbox

Fonality, the makers of trixbox Pro / PBXtra and trixbox CE, the open source PBX platform have named Dean Mansfield as the new CEO. Founding CEO, Chris Lyman will remain as Chairman of the Board. What impact this will have on Fonality is too early to tell but Dean’s background and experience seems to play [...]

Continue Reading →

FreePBX 3.0 announced by Bandwidth.com

On August 7, 2009 · Leave a Comment · In News

FreePBX 3.0 announced with initial support for FreeSWITCH instead of Asterisk

Continue Reading →

Configuring snom 3xx series phones with trixbox CE

On July 10, 2009 · Leave a Comment · In SNOM, snom Tutorials

In this tutorial Kerry walks you through the process of configuring the snom 300 series phones with the open source trixbox CE IP PBX platform. During this video you will see how to use the new trixbox CE Endpoint Manager, how to setup DHCP to help provision the phones, and how to setup the phone manually to pull the configuration files.

Continue Reading →

Using trixbox CE as a SIP Gateway

On June 5, 2009 · 27 Comments · In Tech Bench, trixbox, trixbox Tutorials

If you have a need to have multiple PBX systems running and you want them all to make and receive calls, you will run into a major problem with that because of NAT issues and port forwarding limitations. In this article, I will explain how to use a trixbox CE system as a [...]

Continue Reading →