Currently viewing the tag: "trixbox"

CyberData Product Overview Webinar Mar 1, 2012

On February 10, 2012 · Leave a Comment · In CyberData, Events, News
cyberdata_sidebar

Traditional legacy PBX systems have traditionally used overhead paging systems with an average of 20%-25% of installed endpoints being paging or intercom devices. In the IP PBX market. These same devices are rarely deployed in the IP PBX market and are non-existent in the hosted PBX market even though the requirements for these [...]

Continue Reading →

CyberData Paging Configurations with trixbox Pro

On June 8, 2011 · 1 Comment · In CyberData, CyberData Overviews, trixbox, trixbox Overviews
tbpro_paging_thumb


Paging devices are a large part of the PBX environment and often would be 15-20% of a typical PBX installation. One of the limitations of trixbox Pro is that there is no really good way to setup more than a few paging devices. With trixbox Pro 5.2, you can [...]

Continue Reading →

10 Things To Do On Every trixbox Pro Installation

On May 3, 2011 · Leave a Comment · In trixbox, trixbox Tutorials
tbpro_10things_thumb

As with any IP PBX system there are always a handful of things that need to be done to ensure that everything is working properly and setup correctly. In this video, we cover 10 things you should do with every trixbox Pro installation.

Continue Reading →

Users and Extensions in trixbox Pro v5.2

On April 12, 2011 · 1 Comment · In trixbox, trixbox Overviews
tbpro_users_52_thumb

With the release of trixbox Pro v5.2 there are some really significant changes to how some of the features now work. The biggest change is with the users and extensions, which also affects licensing. With version v5.2 extensions and users are now separated and a user can have up to four extensions assigned to him/her. Where licenses where based on extensions before, now they are based on users. If you had to buy extra licenses so some users could have both an office phone and a remote phone, with version 5.2 this would only require a single license.

Continue Reading →

Fonality announces release of trixbox Pro 5.2

On March 31, 2011 · Leave a Comment · In News, trixbox
trbpro5.2_thumb

Today Fonality has announced that they are releasing trixbox Pro 5.2. If you want a great overview of what is in this highly anticipated release, check out our trixbox Pro 5.2 webinar recording. In short, there are a ton of new features and changes, most importantly the new licensing model which is [...]

Continue Reading →

trixbox Pro 5.2 Overview Webinar Recording

On March 24, 2011 · Leave a Comment · In Events, trixbox, trixbox Overviews
tbpro52_webinar_thumb

In case you weren’t able to attend the trixbox Pro 5.2 webinar we have it all recorded for you to view at your convenience. During the webinar you will learn about all of the changes in trixbox Pro with the new 5.2 release.

Continue Reading →

Patton External SIP Gateways with trixbox Pro

On February 28, 2011 · Leave a Comment · In Patton, Patton Tutorials, trixbox, trixbox Tutorials
trixbox_patton_thumb

While trixbox Pro is usually configured with internal interface cards when connecting to phone circuits, there is definitely good reasons to look at external SIP gateways like Patton devices.

Continue Reading →

Provisioning Aastra IP Phones with trixbox Pro

On December 28, 2010 · Leave a Comment · In Aastra, Aastra Tutorials, IP PBX Systems, trixbox, trixbox Tutorials, VoIP Hardware
trixbox_aastra_thumb

The Aastra IP phones are probably the easiest phones available to get working with trixbox Pro, just plug them into your network and that’s about it. trixbox Pro will automatically create a new extension and phone device for you and tell the phone where to get it’s configuration file from. All you need to do is edit the extension with the user’s information and the phone is ready to use. There really is no easier to use phone with trixbox Pro than the Aastra IP phones.

Continue Reading →

Configuring Snom 820 and 870 IP Phones with trixbox Pro

On December 21, 2010 · Leave a Comment · In IP PBX Systems, SNOM, snom Tutorials, trixbox, trixbox Tutorials, VoIP Hardware
tbpro_snom_thumb

Snom’s European styled phones are quite attractive on the desktop and are very easy to get up and working. While full auto-provisioning with trixbox Pro is not yet available, most of the work is done for you

Continue Reading →

Configuring Polycom IP Phones with trixbox Pro

On December 14, 2010 · Leave a Comment · In IP PBX Systems, Polycom, Polycom Tutorials, trixbox, trixbox Tutorials, VoIP Hardware
tbpro_polycom_thumb

Polycom phones are very popular with trixbox Pro but many people don’t realize just how easy they are to get up and working. The key to really making things as simple as possible is to be running a good DHCP server that can push out Option 66. With this DHCP scope option set, Polycom phones automatically provision themselves with trixbox Pro.

Continue Reading →